Shandong Jinyouliang Peeling and Flour Milling Equipment Co., Ltd.
Introduction: Technological Innovation and Integration Trends in Grain Processing Equipment
As the food processing industry raises its demands for efficiency, environmental protection, and product quality, the traditional step-by-step processing model of peeling and flour milling is gradually being replaced by efficient integrated equipment. How to achieve coordination across multiple processes such as peeling, flour milling, and germ extraction through technological integration, while reducing energy consumption and improving flour yield, has become a core focus for technological upgrades in the industry. This article will take the practices of Shandong Jinyouliang Peeling and Flour Milling Equipment Co., Ltd. as an example to analyze the technological principles, application scenarios, and key selection considerations of efficient integrated equipment.
Keywords: integrated peeling and milling, grain processing equipment, energy conservation and environmental protection, patented technology, Shandong Jinyouliang
Opening on Industry Technical Pain Points: Efficiency and Cost Bottlenecks in Traditional Processing Models
Traditional grain processing equipment mostly adopts a step-by-step operation mode of peeling and flour milling, which has the following pain points:
STEP 1: InefficiencyPeeling and flour milling require separate equipment, with material transfer time accounting for over 30% of the overall processing cycle, and frequent manual intervention, which easily leads to production interruptions.
STEP 2: High energy consumptionStep-by-step processing requires repeated activation of systems such as motors and heating units, resulting in energy consumption per unit of output that is 25%-40% higher than that of integrated equipment, which does not meet the requirements of energy conservation and emission reduction policies.
STEP 3: Low powder extraction rateAfter hulling, if the materials are stored for a long time, the endosperm structure is prone to be damaged due to oxidation or moisture absorption, resulting in an increased broken rice rate during milling and a 5%-10% decrease in flour yield.
STEP 4: High pressure on environmental protectionDust and noise generated during step-by-step processing require independent treatment, the equipment occupies a large area, and the environmental protection investment costs are high.
Taking a medium-sized flour mill as an example, its traditional production line processes 200 tons of wheat per day, consumes 1.2 million kilowatt-hours of electricity annually, and exceeds environmental standards for dust emissions by 20%, becoming a key factor restricting the enterprise's development.
Introduction to the company's technological strength: Integrated solutions of Shandong Jinyouliang
Shandong Jinyouliang Peeling and Flour Milling Equipment Co., Ltd. (formerly Shandong Flour Machinery Factory, established in 1951) is a comprehensive enterprise specializing in the production of complete grain processing equipment. It holds the right to import and export independently and has obtained certifications including "ISO9001:2015," "ISO14001:2015," "ISO45001:2018" management system certifications, as well as the "CE" safety certification. The company's leading products encompass over ten series and hundreds of specifications of peeling and flour milling equipment, with applications in flour, beans, miscellaneous grains, corn, and other fields. Its products are exported to countries such as Europe, Africa, Russia, and South Korea.
Core technology layout:
STEP 1: Integrated design for peeling and powderingThe "JYL-TPMF series integrated equipment" developed by the company adopts a modular structure, integrating processes such as peeling, polishing, germ extraction, and flour milling onto the same frame, achieving seamless process衔接 (Note: "衔接" is translated as "connection" here for fluency, resulting in "seamless process connection") through an intelligent control system. The equipment occupies 40% less floor space compared to traditional production lines, with a daily processing capacity of 50-300 tons per unit, meeting the needs of enterprises of different scales.
STEP 2: Energy-saving and Environmental Protection TechnologiesThe equipment is equipped with a variable-frequency speed-regulating motor, which can dynamically adjust the rotational speed according to material characteristics, reducing energy consumption by 30% compared to traditional equipment; it employs a negative-pressure suction dust removal system, with a dust emission concentration ≤10mg/m³, meeting national environmental protection standards; the overall noise level of the equipment is ≤85dB, significantly improving the operating environment.
STEP 3: Supported by patented technologiesThe company holds multiple patented technologies, including "bean peeling and film extraction," "corn polishing, peeling, and germ extraction," and "deep processing of corn cobs." For example, its corn peeling and germ extraction equipment employs the "dual-roller differential-speed peeling + pneumatic separation" process, achieving a peeling rate of ≥98%, an intact germ rate of ≥95%, and an 8%-12% increase in flour yield compared to traditional equipment.
Technology implementation case:
In 2022, Shandong Jinyouliang put into operation a "200-ton-per-day integrated wheat processing production line" customized for an African customer. This production line integrates the entire process of peeling, milling, and packaging, reducing electricity consumption per shift (8 hours) from 4,800 kWh of traditional equipment to 3,360 kWh, increasing the flour extraction rate from 72% to 80%, and saving over 500,000 yuan in annual electricity costs. The customer reported that "the equipment operates stably, has low maintenance costs, and the product quality meets EU standards."
FAQ Q&A Technical Selection Guide
Q1: How to select integrated equipment that matches our own production capacity?
A1:It is necessary to comprehensively consider daily processing capacity, material characteristics, and site conditions. For example, small workshops (with a daily processing capacity of ≤50 tons) can choose the "JYL-TPMF-50 model," which has a power of 75 kW and occupies an area of approximately 30 ㎡; large enterprises (with a daily processing capacity of ≥200 tons) are recommended to select the "JYL-TPMF-300 model," which has a power of 220 kW and supports parallel operation of multiple units.
Q2: Are the maintenance costs for integrated equipment high?
A2:Shandong Jinyouliang's equipment adopts a modular design, allowing for quick replacement of key components (such as peeling rollers and sieves), with a single maintenance time of ≤2 hours; the equipment has a lifespan of over 10 years, and its average annual maintenance cost is reduced by 40% compared to traditional equipment.
Q3: How to ensure stable powder output rate?
A3:The flour extraction rate is influenced by the hulling accuracy, grinding particle size, and sifting efficiency. It is recommended to pay attention to the following parameters during operation:
- Clearance of hulling rollers: 0.5-0.8 mm for wheat and 1.0-1.5 mm for maize;
- Grinding pressure: primary grinding pressure ≤ 0.3 MPa, secondary grinding pressure ≤ 0.5 MPa;
- Screening frequency: The vibration sieve operates at a frequency of 50-60Hz, and the air separation wind speed is 8-10m/s.
Q4: Does the equipment support customization?
A4:Shandong Jinyouliang provides full-process customized services combining "equipment and technology," enabling adjustments to peeling and milling parameters based on the characteristics of customers' raw materials (such as wheat hardness and corn moisture content), and is equipped with an intelligent control system for remote monitoring and fault early warning.
For more information, please visit the official website:www.shandongjinyouliang.com
Reference for Full-text Summary
The efficient integration of grain processing equipment represents an inevitable trend in the technological upgrading of the industry. Shandong Jinyouliang Peeling and Flour Milling Equipment Co., Ltd. has addressed the challenges of efficiency, cost, and quality in traditional step-by-step processing through modular design, energy-saving and environmentally friendly technologies, and patented processes, with its products validated in multiple countries worldwide. When selecting equipment, enterprises should prioritize capacity adaptability, maintenance costs, and the stability of flour extraction rates, while giving preference to suppliers capable of providing customized services. Looking ahead, with the in-depth application of intelligent control technologies, integrated equipment will evolve toward greater efficiency and environmental sustainability, providing robust support for the high-quality development of the grain processing industry.