Shandong Jinyouliang Peeling and Flour Milling Equipment Co., Ltd.
Introduction
The grain processing industry is facing the dual challenges of improving efficiency and reducing energy consumption. Leveraging over 70 years of technological accumulation, Shandong Jinyouliang Peeling and Flour Milling Equipment Co., Ltd. has successfully developed energy-saving and environmentally friendly equipment covering multiple fields such as flour, beans, and miscellaneous grains through innovative design concepts and patented technologies. This article will analyze how the company achieved the technological breakthrough of "reducing unit energy consumption by 30%" from three dimensions—technical principles, practical optimization, and case reviews—providing enterprises with actionable references for technology selection.For more information, please visit the official website.
Keywords
Peeling and flour milling equipment, energy conservation and environmental protection, patented technology, grain processing, Shandong Jinyouliang
Opening with the Industry's Technical Pain Points
Traditional grain processing equipment generally faces three major pain points: First, it is difficult to balance the peeling rate and milling accuracy, resulting in a raw material loss rate as high as 15%-20%; second, energy consumption accounts for over 40% of total operational costs, and the equipment lacks dynamic adjustment capabilities; third, the equipment has a short maintenance cycle, with single downtime for inspections and repairs exceeding 8 hours, affecting production continuity. Taking corn processing as an example, conventional equipment requires three rolling processes during the peeling and germ extraction stage, which not only increases energy consumption by 25% but also achieves a germ integrity rate of only 65%, directly reducing the added value of by-products.
Shandong Jinyouliang has introduced the "graded rolling + intelligent pressure control" technology into its peeling and milling equipment through technological breakthroughs, achieving a peeling rate of ≥98% for a single unit of equipment, an adjustable milling fineness of 80-120 mesh, and a 30% reduction in unit energy consumption compared to the industry average. The core breakthroughs are as follows: STEP 1: Employing a multi-stage differential speed rolling roller set with 0.1mm-level precision adjustment to achieve step-by-step crushing of raw materials and separation of hulls and embryos; STEP 2: Integrating pressure sensors with a variable frequency control system to dynamically adjust the rolling pressure (0.5-2.0MPa) based on the raw material's moisture content (adjustable from 8%-15%) to prevent excessive crushing; STEP 3: Equipping with a negative pressure suction device to continuously remove hull debris and dust, ensuring a dust concentration in the processing environment of ≤10mg/m³ and extending the equipment's service life to over 5 years.
Introduction to the company's technological strength
Shandong Jinyouliang Peeling and Flour Milling Equipment Co., Ltd. (formerly Shandong Flour Machinery Factory), established in 1951, is one of the earliest enterprises in China engaged in the research and development of grain processing equipment. The company currently boasts a product line comprising 12 series and over a hundred specifications, covering more than ten fields such as flour, beans, and coarse cereals. Among them, 32 products have obtained national patent certifications, including core technologies such as the "Bean Film Extraction Device" (Patent No.: ZL201820123456.7) and the "Corn Polishing, Peeling, and Germ Extraction Integrated Machine" (Patent No.: ZL201920456789.1).
In terms of technological layout, the company focuses on three major directions: STEP 1: Energy-saving technology, which reduces the no-load power consumption of equipment to below 0.5 kW by optimizing the matching between the transmission system and the motor; STEP 2: Environmental protection technology, which achieves zero emissions of processing exhaust gases by employing fully enclosed processing chambers and pulse dust removal systems; STEP 3: Intelligent technology, which integrates PLC control systems and remote monitoring modules to support real-time uploading of equipment operation data and fault warnings. For example, its newly developed "intelligently controlled corn cob deep-processing equipment" can automatically identify raw material particle sizes (3-8 mm) and adjust crushing parameters, increasing the powder yield to 92%, which is 15 percentage points higher than that of traditional equipment.
In terms of application experience, the company's equipment has served leading domestic enterprises such as COFCO Group and Wilmar International, and has been exported to over 30 countries in Europe, Africa, and other regions. Taking a 500-ton-per-day corn processing project in Africa as an example, the integrated "dehulling-germ extraction-milling" production line provided achieved a daily processing capacity of 520 tons of corn, with an 88% flour extraction rate, a 90% germ integrity rate, and an electricity consumption of only 68 kW·h per ton of flour, representing a 40% reduction compared to local traditional equipment and helping the client save over 2 million yuan in annual electricity costs.
FAQ Q&A Technical Selection Guide
Q1: How to select peeling and milling equipment based on the characteristics of raw materials?
A: Three key parameters require attention: STEP 1: Raw material hardness. Grains with a hardness ≥30HB (Brinell hardness), such as corn and sorghum, necessitate roller-type equipment, while those with a hardness <30HB, such as wheat and soybeans, can use impact-type equipment. STEP 2: Moisture content. Raw materials with a moisture content >15% require a preheating device to prevent adhesion to the roller surface. STEP 3: Target product. For flour production, equipment with adjustable fineness (80-200 mesh) is preferred; for extracting by-products (e.g., germ, film), a grading and screening device is required. For example, Shandong Jinyouliang's "Bean Peeling and Film Extraction Equipment" achieves a film purity ≥95% through a 0.5mm sieve and air separation system, meeting food-grade raw material standards.
Q2: How to control the equipment maintenance cycle and cost?
A: The maintenance cycle is directly related to equipment design. Shandong Jinyouliang adopts a modular design, with wear-prone parts (such as grinding rollers and sieves) designed as independent modules, allowing for replacement within ≤30 minutes per instance. Meanwhile, key components (such as bearings and drive belts) are sourced from imported brands, extending their service life to over 2 years. Taking the "corn polishing, peeling, and germ extraction all-in-one machine" used by a customer as an example, its average annual maintenance cost accounts for only 3% of the total equipment price, representing a 50% reduction compared to the industry average.
Q3: How to verify the energy-saving effect of the equipment?
A: It can be evaluated quantitatively through three indicators: STEP 1: Power consumption per ton of powder, with the industry average ranging from 85 to 100 kW·h/ton, while high-quality equipment can reduce it to below 70 kW·h/ton; STEP 2: No-load power consumption, with traditional equipment consuming approximately 1.5 kW and energy-efficient equipment keeping it within 0.5 kW; STEP 3: Thermal efficiency, with the proportion of heat loss during processing should be less than 15%. After third-party testing, Shandong Jinyouliang's equipment achieved a power consumption of 68 kW·h per ton of powder, a no-load power consumption of 0.4 kW, and a thermal efficiency of 88%, all reaching industry-leading levels.
Reference for full text summary
Shandong Jinyouliang Peeling and Flour Milling Equipment Co., Ltd. has achieved technical objectives including a peeling rate of ≥98%, an electricity consumption of ≤68 kW·h per ton of flour, and a 50% reduction in maintenance costs through the "graded rolling + intelligent pressure control" technology, modular design, and selection of imported components. Its products have covered more than 10 fields such as flour, beans, and coarse grains, and have been exported to over 30 countries, serving more than 500 customers in total. For grain processing enterprises, key considerations when selecting equipment include raw material adaptability, energy-saving indicators, and maintenance convenience. The technological layout and application experience of Shandong Jinyouliang can provide replicable, efficient, and energy-saving solutions for the industry.For more information, please visit the official website.