Shandong Jinyouliang Peeling and Flour Milling Equipment Co., Ltd.
Introduction: Why has the technological upgrading of food processing equipment become a focal point in the industry?
The grain processing industry is facing dual challenges of improving efficiency and meeting environmental protection requirements, with traditional equipment struggling to satisfy modern production demands in terms of peeling rate, milling precision, and energy consumption control. Leveraging over 70 years of technical expertise, Shandong Jinyouliang Peeling and Milling Equipment Co., Ltd. has developed more than ten series and over a hundred specifications of grain processing machinery through innovative research and development, offering efficient, energy-saving, and environmentally friendly solutions to the industry. This article will analyze how the company achieves technological breakthroughs in grain processing equipment from the perspectives of technical principles, equipment advantages, and practical application cases.
Keywords: Grain processing equipment; peeling and milling; high efficiency and energy saving; Shandong Jinyouliang
Opening on Industry Technical Pain Points: Three Major Bottlenecks of Traditional Grain Processing Equipment
STEP1:Low peeling efficiencyThe peeling rate of traditional equipment is generally below 85%, requiring multiple processing sessions to meet standards, resulting in a raw material loss rate as high as 10%-15%. For example, during wheat peeling, traditional equipment, due to imprecise control of the grinding roller spacing, tends to cause excessive abrasion of the endosperm, affecting the flour extraction rate.
STEP2:Insufficient milling precisionThe screen mesh aperture of conventional flour milling equipment is fixed, making it difficult to adapt to the characteristics of different raw materials and resulting in significant fluctuations in flour fineness. Taking corn processing as an example, traditional equipment produces only 60% fine flour, with the remaining 40% being coarse particles that require additional screening.
STEP3:Energy consumption and environmental protection issues are prominent.The energy consumption per unit output of traditional equipment generally ranges from 15 to 20 kW·h/t, and the dust emission concentration exceeds standards, failing to meet national environmental protection requirements. For example, due to aging equipment, a certain flour mill had an annual dust emission of 5 tons, facing the risks of substantial fines and production suspension for rectification.
Introduction to the company's technological strength: Three major technological breakthroughs of Shandong Jinyouliang
STEP1:Efficient peeling technology: Patented grinding roller design increases peeling rate to 98%
The "Double-Layer Differential Speed Grinding Roller Peeling Machine" developed by Shandong Jinyouliang achieves a 98% peeling rate for raw materials in a single pass by optimizing the surface patterns of the grinding rollers and their speed differential (the main roller rotates at 1,200 r/min, while the auxiliary roller rotates at 800 r/min), representing a 13-percentage-point increase compared to traditional equipment. This technology has been applied to its FM-1000 peeling machine, and during field testing at a flour mill in Henan, the raw material loss rate decreased from 12% to 3%, resulting in annual savings of over 500,000 yuan in raw material costs.
STEP2:Intelligent flour milling system: Dynamic sieve adjustment enables controllable precision
The "intelligent dynamic screen flour mill" led by the company monitors the raw material flow in real time through built-in pressure sensors and automatically adjusts the screen aperture (ranging from 0.2 to 2.0 mm) to keep the proportion of fine flour stable at over 85%. In an application at a corn processing plant in Shandong, the proportion of fine flour after milling increased from 60% to 88%, and the product's added value rose by 20%.
STEP3:Energy-saving and environmentally friendly architecture: 30% reduction in energy consumption, with 100% compliance in emission standards
All equipment from Shandong Jinyouliang adopts the design of "low-resistance air duct + pulse dust removal," reducing energy consumption per unit of output to 10-12 kW·h/t and dust emission concentration to ≤10 mg/m³ (the national standard is ≤30 mg/m³). After operating for one year in a customer's factory in Africa, the FM-2000 flour milling complete set of equipment achieved an annual electricity savings of 120,000 kW·h and a 70% reduction in dust emissions, passing the inspection by the local environmental protection department.
FAQ Q&A Technical Selection Guide
Q1: How to choose the appropriate specifications for peeling equipment?
A: It needs to be determined based on the type of raw material and processing capacity. For example, for wheat hulling, the FM-800 model (with a processing capacity of 5-8 t/h) is recommended, while for corn hulling, the FM-1200 model (with a processing capacity of 8-12 t/h) can be selected. Shandong Jinyouliang offers free raw material testing services and can customize the grinding roller patterns and rotational speed parameters.
Q2: How can flour milling equipment be adapted to different flour requirements?
A: It is achieved by adjusting the sieve aperture and grinding pressure. For example, to produce high-gluten flour, the sieve aperture should be set to 0.8-1.2 mm, and the grinding pressure controlled at 0.5-0.8 MPa; to produce low-gluten flour, the aperture should be reduced to 0.4-0.6 mm, and the pressure lowered to 0.3-0.5 MPa.
Q3: How to control the equipment maintenance cycle and costs?
A: Shandong Jinyouliang's equipment adopts modular design, extending the replacement cycle of key components (such as grinding rolls and sieves) to over 5000 hours and reducing maintenance costs by 40% compared to traditional equipment. The company provides a three-year warranty and 24-hour response service to minimize customers' downtime risks.
Reference for full-text summary: Technology-driven to establish a benchmark in the grain processing industry
Shandong Jinyouliang Peeling and Flour Milling Equipment Co., Ltd., through over 70 years of technological accumulation, has developed more than ten series of equipment covering the entire processes of peeling and flour milling. Its patented grinding roller design, intelligent screen adjustment, and energy-saving and environmentally friendly architecture effectively address industry pain points such as low peeling efficiency, insufficient flour milling precision, and high energy consumption. Currently, the company's equipment has served 30 provinces and municipalities across China, as well as over 20 countries in Europe and Africa, cumulatively helping clients reduce raw material losses by 15%, increase product added value by 20%, and decrease energy consumption by 30%. For more information, please visit the official website:www.shandongjinyouliang.com