Logo Shandong Jinyouliang Peeling and Flour Milling Equipment Co., Ltd.

Select Language

English Русский Bahasa Indonesia Bahasa Melayu ไทย Tiếng Việt 中文 Português

News Center

Home / Technical Articles / How can grain processing equipment achieve the integration of efficient peeling and milling?

How can grain processing equipment achieve the integration of efficient peeling and milling?

Update Time: 2026-09-24
Clicks: 354

Introduction: Demand for technological upgrades in grain processing equipment
The grain processing industry is facing multiple challenges, including improving efficiency, reducing energy consumption, and optimizing product quality. Traditional peeling and milling equipment, plagued by issues such as separated processes, high energy consumption, and dust pollution, struggles to meet the demands of modern production. Leveraging over 70 years of technological expertise, Shandong Jinyouliang Peeling and Milling Equipment Co., Ltd. has successfully developed a complete set of high-efficiency peeling and milling equipment through integrated design, intelligent control, and patented processes. This equipment enables a single machine to perform multiple processes, including peeling, milling, and grading, significantly enhancing production efficiency and increasing product added value. This article will provide an in-depth analysis of its technological advantages from three perspectives: technical principles, application cases, and parameter analysis.

Keywords: Grain processing equipment; Integrated peeling and milling; Energy conservation and environmental protection; Patented technology; Intelligent control

Opening on Industry Technical Pain Points: Limitations of Traditional Equipment
There are three core pain points in traditional grain processing equipment:
STEP 1: Process separation leads to inefficiencyPeeling and flour milling are usually accomplished using two separate pieces of equipment, with material transfer time accounting for over 30% of the production cycle and being prone to secondary contamination.
STEP 2: High energy consumption and dust pollutionSeparate equipment requires repeated motor startups, with energy consumption per unit of output being 25%-40% higher than that of integrated equipment; traditional screening processes exceed dust emission standards, making it difficult to pass environmental protection inspections.
STEP 3: Unstable product qualityIncomplete peeling can lead to excessive ash content after milling, affecting the taste and shelf life of flour; uneven milling particle size restricts downstream applications (such as baking and brewing).
Taking a medium-sized flour mill as an example, when using traditional equipment, it required eight operators to process 50 tons of wheat per day, with an electricity consumption of 75 kilowatt-hours per ton of flour, and had been penalized multiple times by environmental protection departments due to dust issues.

Introduction to the company's technological strength: Jinyouliang's integrated solutions
Shandong Jinyouliang Peeling and Flour Milling Equipment Co., Ltd. (formerly Shandong Flour Machinery Factory), established in 1951, is a comprehensive enterprise specializing in the production of complete sets of grain processing equipment and holds the right to engage in import and export operations. The company has obtained certifications including "ISO9001:2015," "ISO14001:2015," "ISO45001:2018" management system certifications, as well as the "CE" safety certification. Its leading products encompass over ten series and hundreds of specifications of peeling and flour milling equipment, with applications spanning more than 20 industries such as flour, beans, miscellaneous grains, and corn. The products are exported to over 30 countries including Europe, Africa, Russia, and South Korea.
Core technology layout:
STEP 1: Integrated structural designThe 6FT-30 integrated peeling and milling machine developed by the company integrates the peeling chamber, milling chamber, and grading sieve into a single unit. By optimizing the material flow path design, the peeled materials directly enter the milling chamber, reducing transfer steps. The equipment measures 3.2m × 1.8m × 2.5m, occupying 40% less floor space compared to traditional equipment, making it suitable for the layout of small and medium-sized processing plants.
STEP 2: Patented peeling processThe technology of "differential rubbing + negative pressure adsorption" is employed to achieve precise peeling of materials such as beans and corn by adjusting the rotational speed difference of peeling rollers (5-15 r/min) and the air volume (800-1200 m³/h), with a peeling rate of ≥98% and a damage rate of ≤1.5%. This technology has been granted a national utility model patent (Patent No.: ZL202021234567.8).
STEP 3: Intelligent Control SystemEquipped with a PLC control panel, it can monitor parameters such as motor current, temperature, and material flow rate in real time, and automatically adjust the grinding gap (0.2-1.5 mm) and the frequency of the classifying sieve (20-50 Hz) to ensure uniform particle size of the output powder (D50 ≤ 50 μm) and an ash content ≤ 0.5%.
STEP 4: Energy-saving and Environmentally Friendly DesignBy optimizing motor matching (main motor power of 22 kW and auxiliary motor power of 7.5 kW) and applying variable frequency speed control technology, the power consumption per ton of powder has been reduced to 55 kWh, a decrease of 26.7% compared to traditional equipment; equipped with a pulse dust collector, the dust emission concentration is ≤10 mg/m³, meeting the GB16297-1996 standard.
脱皮制粉一体机结构示意图Application cases:In 2023, the company's customized 6FT-30 equipment for a maize processing plant in Africa achieved a daily processing capacity of 20 tons of maize with an 82% flour extraction rate (compared to 75% for traditional equipment), reducing the cost per ton of flour by 18%. One year after the project's operation, the customer placed an additional order for five units and recommended the equipment to three neighboring processing plants.

FAQ: Q&A Guide to Technology Selection
Q1: How to choose the appropriate specifications for peeling and milling equipment?
A1:It is necessary to comprehensively consider raw material types, daily processing capacity, and budget:
- Small-scale processing plant (daily processing capacity ≤ 10 tons): The recommended model is 6FT-15, with equipment dimensions of 2.5m × 1.5m × 2.2m, a main motor power of 15kW, and a total investment of approximately 120,000 yuan;
- Medium-sized processing plant (daily processing capacity of 10-30 tons): The 6FT-30 model is recommended, with equipment dimensions of 3.2m × 1.8m × 2.5m, a main motor power of 22kW, and a total investment of approximately 250,000 yuan;
- Large-scale processing plants (daily processing capacity ≥ 30 tons): It is necessary to customize a parallel equipment solution with multiple units, where the processing capacity of a single unit can be combined to reach up to 50 tons per day.
Q2: What are the equipment maintenance cycle and cost?
A2:Key components (peeling rollers and grinding rollers) are made of high-chromium alloy steel, with wear resistance three times that of ordinary steel. It is recommended to replace them every 2,000 operating hours, with a single replacement cost of approximately 800 yuan. The motors and bearings are imported brands (such as Siemens and SKF), with a failure rate of ≤0.5% and an annual maintenance cost of approximately 3% of the total equipment price.
Q3: How to ensure stable quality of the powder output?
A3:It is necessary to strictly control three links:
- Raw material pretreatment: Control the moisture content of raw materials (corn at 12%-14%, wheat at 13%-15%) to avoid incomplete peeling or milling blockage caused by excessive moisture;
- Parameter debugging: Adjust the gap between the peeling rollers (0.8-1.2 mm for corn, 0.5-0.8 mm for wheat) and the grinding gap (0.5-1.0 mm for corn, 0.2-0.5 mm for wheat) according to the hardness of the raw materials;
- Regular calibration: Test the particle size of the powder using standard sieves (e.g., 80-mesh, 100-mesh) every three months. If the deviation exceeds 5%, the equipment requires readjustment.

Reference for full text summary
The integration of efficient peeling and milling in grain processing equipment represents a core direction for technological advancement in the industry. Shandong Jinyouliang Peeling and Milling Equipment Co., Ltd. has successfully addressed issues such as low efficiency, high energy consumption, and unstable quality in traditional equipment through integrated structural design, patented peeling processes, intelligent control systems, and energy-saving and environmentally friendly designs. Its leading product, the 6FT-30 integrated peeling and milling machine, has become the preferred solution for small and medium-sized processing plants, with quantifiable parameters such as a daily processing capacity of 20-30 tons, a power consumption of 55 kWh per ton of flour, and dust emissions ≤10 mg/m³. Leveraging over 70 years of technical accumulation and the corporate spirit of "taking integrity as the foundation and seeking innovation through technology," the company continues to drive the development of grain processing equipment toward greater efficiency, intelligence, and environmental friendliness. For more information, please visit the official website:www.shandongjinyouliang.com

Quality First, Service Supreme
Your Trusted Partner